An ill-fitting replacement screen costs more than just its purchase price. It sits idle while the shaker runs on worn cloth, and reordering adds extra lead time.
The problem is often not the mesh. Two screens can look similar but use different mounting arrangements.
The two models that often cause confusion are the Flo-Line Cleaner™ 2000 and the Flo-Line Cleaner™ 500, both from Derrick®. Each uses a different screen series. Check the series first, then confirm the mounting arrangement before ordering replacement shaker screens.
Check the equipment nameplate first, then confirm the screen series. The model name alone may not give you enough information to order the right replacement.
| Feature | Derrick® FLC 2000™ | Derrick® FLC 500™ |
| Screen series | 48 × 30 Series | 500 Series |
| Compatible equipment | FLC 2000 three- and four-panel shakers; also used on specified FLC with AWD, FLC Plus, HI-G Dryer and Cascade 2000 configurations | FLC 500 Series shakers, including FLC 503, FLC 504, FLC 513 and FLC 514 |
| Tensioning arrangement | Two pairs of Rapid-Change draw bolts on each side of each panel | Single-side tensioning fingers with two Quick-Lok half-turn bolts per panel |
| Screen-change access | Access to both sides of each panel's tensioning arrangement | Tensioning from one side, configured for left- or right-side operation |
| Derrick screen types | PWP™ flat, Pyramid® (PMD®), Pyramid Plus™ (PMD+™) | PWP™ flat, Pyramid® (PMD®), Pyramid Plus™ (PMD+™) |
| TR replacement options | 48 × 30 flat screens and 48 × 30 PMD screens | 500 Series flat screens and 500 Series PMD screens |
The FLC 2000 is available in three-panel and four-panel configurations. The 48 × 30 designation identifies its screen series; it should not be treated as a verified measurement of the panel's external frame dimensions. Confirm the replacement against the applicable drawing and deck configuration.
The FLC 500 uses the 500 Series. Its tensioning arrangement differs from the FLC 2000, so a panel should not be selected by appearance or a rough measurement alone.
The FLC 2000 uses a Rapid-Change draw-bolt arrangement to hold each panel in place. Derrick specifies two pairs of draw bolts on each side of the panel. The crew needs access to both sides of the tensioning arrangement when changing screens.
The FLC 500 uses a single-side system with tensioning fingers and two Quick-Lok half-turn bolts per panel. The tensioning system can be configured for operation from the left or right side. If the shaker is installed on a containerised skid or close to a bulkhead, check which side provides access before planning a screen change.
The tensioning assembly for FLC 503, FLC 504, FLC 513 and FLC 514 is also worth checking when a replacement panel does not seat correctly. Worn or damaged tensioning components may prevent a panel from fitting securely, even when it belongs to the correct series.
A screen listed for a Derrick shaker will not necessarily fit every Derrick model. Compatibility depends on the screen series, panel construction and retention arrangement, not the brand name alone.
Check the full shaker model, the screen series and the tensioning arrangement. If the existing panel has been replaced before, do not assume it matches the original factory specification.
When dimensions are needed, compare the panel's length, width, thickness and frame profile with a verified drawing for the exact screen series. Also check the panel edges, sealing surfaces and tensioning points. A measurement across the top surface alone cannot confirm fit.
If the old panel is damaged or its markings are unreadable, send the supplier clear photos of the top, underside and tensioning edges. Include the shaker nameplate and the current API RP 13C designation, if available.
For PWP panels specifically, the PWP shaker screen replacement guide explains when a panel may be repairable and what information to provide when ordering a replacement.
Derrick offers PWP flat panels, Pyramid (PMD) and Pyramid Plus (PMD+) designs in the relevant screen series. Once the correct series is confirmed, compare the available design and API RP 13C designation against the separation requirements of your drilling operation.
Pyramid-style screens use a contoured screening surface that can provide more effective screening area within the same panel footprint. Actual performance depends on the screen design and drilling conditions. Do not assume that switching from a flat panel to PMD or PMD+ will automatically increase shaker capacity.
Aftermarket panels with similar external dimensions may use different hook-strip profiles, backing plate thicknesses or sealing arrangements. These differences may not be obvious from a measurement across the top face, but they can affect installation and sealing.
If the shaker remains under the original manufacturer's warranty, review the applicable terms before fitting aftermarket replacement screens.
The API RP 13C designation describes screening characteristics, but it does not guarantee mechanical fit. A screen that meets the required separation specification but cannot be secured correctly is unusable. The panel must also meet the solids control requirements of the drilling operation.
Ask the supplier to confirm both mechanical compatibility and the screening specification before production. One without the other is not enough.
Include the shaker model, screen series, panel quantity, current API RP 13C designation and clear photos of the existing panel and mounting edges. If available, attach a drawing or verified dimensions for the exact screen configuration. Add a brief description of the drilling application.
This information reduces unnecessary back-and-forth and helps the supplier check compatibility before the order is confirmed.
TR Solids Control supplies aftermarket replacement screens for selected Derrick FLC 2000 and FLC 500 configurations, including flat and Pyramid-style panels for the 48 × 30 and 500 Series. Send us your shaker model, screen details and photos so we can check compatibility and confirm the available replacement options.
Derrick®, Flo-Line Cleaner™, FLC™, PWP™, Pyramid®, PMD®, Pyramid Plus™, Hyperpool® and HI-G® are trademarks of Derrick Corporation. These names are used solely to identify the equipment and screen types referenced on this page. TR Solids Control is an independent manufacturer of aftermarket replacement parts. Our products are not genuine Derrick parts. Compatibility should be confirmed for the specific shaker configuration before ordering.

Address: No.2 Huochang Road, Yangling District,Xianyang City, Shaanxi Province, China
Tel: +86-18509252400
Wechat: 18509252400
Email: info@mudsolidscontrol.com
Contact: Mr.Li